Programmable Outputs

In the example below;

-We activate a fan on output pin PA0 (or any user selectable output pin) , above a coolant value of 83C° and a hysteris of 3C°( the hysteris aka offset is there to,avoid constant ON/OFF states if the temp hoovers around 83C°)

You can activate outputs on signal(s) within the drop-down list.

With 1 condition or multiple conditions.

Depending on the ECU there are different outputs to be configured, the KdFi has less user in- & outputs compared to the SM3.

All outputs can be test-activated via the test-menu under Tunderstudio

ECU output's are ALWAYS ground operated!

!!On some KdFi versions the IAC1 and IAC2 output's are inversed; IAC1 = IAC2 in software and vice versa!!


There are no products to list in this category.